VILVA-EVD DC Charging Pile Testing Device

Product Description

The national standard meets: "GB/T34657.1-2017 Electric Vehicle Conductive Charging Interoperability Test Specification Part 1 Power Supply Equipment" test project requirements; "GB/T34658-2017 Electric vehicle off-board conductive charger and battery management system" test project requirements "Communication protocol conformance test" test item requirements; the built-in simulated vehicle BMS software "GB/T27930-2015 Communication protocol between off-board conductive chargers and battery management systems for electric vehicles" is compatible with the requirements of the GB/T27930-2011 version; European and American standard communication protocols: Charging communication meets ISO15118 and DIN70121 standard requirements; power transmission meets IEC61851 standard requirements; vehicle sockets meet IEC62196 standard requirements; Japanese standard protocol meets CHAdeMO1.2&2.0 standard requirements; vehicle sockets meet IEC62196 standard requirements.

Product advantages

● The charger's CHM, CRM, CTS, CML, CRO, CCS, CST, CSD, CEM and other message statuses are displayed in real time;

● The vehicle-side message content and message cycle can all be set, which can simulate various vehicle message situations;

● The host computer uses USB interface for direct control, which eliminates the cumbersome wiring and adapters compared with 485 and 232;

● Real-time message output and translation during the communication process, and has a real-time saving function. It is equivalent to having the function of a CAN box, which facilitates direct use and fault analysis by various related personnel;

● Statistics on the average period, number of transmissions, maximum period, and minimum period of various types of messages. Message Gantt waveform chart output makes fault analysis of charging piles more intuitive and comprehensive;

● Test the communication consistency of charging piles and have the function of outputting analysis reports;

● Equipped with battery voltage simulation, which can simulate the positive connection, reverse connection and no connection test of the battery;

● Built-in K5 and K6 switch state simulation function, multi-level R4 resistance setting, can test critical gun withdrawal state, complete gun withdrawal state, resistance adjustment range 295Ω~2550Ω;

● Insulation module: It can meet the charger insulation, reverse connection test and non-connection test. The test voltage access range is 0- 1000V, and the insulation resistance adjustment range is 22.9kΩ~300kΩ;

● It has a level 1 electric energy meter, which can display the output voltage, current, and power of the charging pile in real time, count the charging power, and can synchronize the data to the BCS message;

● SOC increases automatically, and the charging time can be set to achieve the automatic aging test function;

● Interoperability test, insulation failure test, gun pull test, battery reverse connection, no connection and other tests;

● It has terminals for pile end signal voltage, current, CC1, auxiliary power supply, abnormal synchronization signal, etc., and can be connected to other testing instruments for pile end signal testing and test inspection;

● Internally integrated battery voltage simulator, voltage range 0-1000V, used for charging pile startup timing test (optional);

● Charging pile socket (national standard, European standard, American standard, Japanese standard optional);

● Optional measurement verification functions: LAN, RS232, WIFI and other communication methods, built-in WIFI hotspot, remote wireless

terminal. 0.05 level calibration test items: working error, indication error, payment amount error, clock indication error, which can complete the 0

.05 level measurement calibration test function of JJG1149-2018.

product details

c5 (2)

c4 (6)

c2 (6)

c1 (6)

c3 (6)

Product parameters

Product model	Rated power	Rated voltage	Gear resolution	Charging socket standard	Communication port		*Case size WDH mm*	Weight(kg)
		DC	charging pi	le test device (n	o load)
VILVA-EVD1000V/GB-T	/	1000V	/	GB-T	USB		560350230	15
VILVA-EVD1000V/CCS1	/	1000V	/	CCS1				15
VILVA-EVD1000V/CCS2	/	1000V	/	CCS2				15
VILVA-EVD600V/CHAdeMO	/	600V	/	CHAdeMO				15
VILVA-EVD-GB-T/CCS1/CCS2/CHAdeMO	/	600V/1000V	/	GB-T/CCS1 CCS2/CHAdeMO			483378317	30
	DC s	ingle gu	n charging	pile test device	(including re		sistive load)
VILVA-EVD1000V-20KW	20	1000V	0.1	GB-T CCS1 CCS2 CHAdeMO	USB		6007501332	130
VILVA-EVD1000V-40KW	40						6007501332	160
VILVA-EVD1000V-80KW	80						60010001554	200
VILVA-EVD1000V-120KW	120						85010001700	250
VILVA-EVD1000V-180KW	180						100011001700	300
VILVA-EVD1000V-240KW	240						100011001700	400
	DC d	ouble gu	n charging	pile test device	(including re		sistive load)
VILVA-EVD1000V-30KW*2	60	1000V	0.1	GB-T CCS1 CCS2 CHAdeMO	USB		60010001335	180
VILVA-EVD1000V-60KW*2	120						80010001700	250
VILVA-EVD1000V-90KW*2	180						90010001700	300
VILVA-EVD1000V-120KW*2	240						100011001700	400
VILVA-EVD1000V-160KW*2	320						100015001820	500
VILVA-EVD1000V-240KW*2	480						100018001820	600
Special specifications can be customized according to customer requirements (voltage, power, size, customized model cycle is slightly longer)
Protection function: over-voltage, gun seat over-temperature, load over-temperature Working power supply: single phase 220Vac Load accuracy: -5%-+2% Noise: 65-85dB (no load, no noise) Cabinet color: RAL9003/orange/Huawei gray						Protection level: IP20 (indoor) Movement method: handle/caster movement Ambient temperature: -10°C~+50°C; Relative humidity: 90%; Altitude: 2500M

VILVA-EVD DC Charging Pile Testing Device for Electric Vehicle Assessment