Uninterruptible Power Supply Test System for Reliable Performance Assessment

Product advantages

● Meet the three-three, three-single, and single-single model tests;

● Contains DC input, AC input, and inverter output interfaces;

● The DC input includes DC Source input and battery input, and the two are interlocked and related;

● AC input includes mains input and AC Source input, both of which are interlocked and related;

● Each input and output interface has voltage, current, power and other electrical parameter sampling;

● The inverter output has a short circuit test function (optional);

Reserve external serial port and USB interface to facilitate communication with the prototype;

● The input and output interfaces use quick-plug connectors to facilitate prototype wiring;

● Equipped with code scanning gun (supports two-dimensional and three-dimensional) and supports code scanning test (optional);

● All instruments and meters are equipped with remote control functions and are uniformly controlled by the host computer;

● The system is equipped with RCD load and DC charging load (load type is optional); System battery pack optional;

● Both input and output circuits can be tested for instantaneous switching and instantaneous switching;

● System emergency stop protection, load over-temperature alarm and protection.

product details

c4 (5)

c3 (5)

c2 (5)

c1 (5)

Product parameters

Product model	Rated Power(KW)	Power Range	AC Source	DC Source	AC load Configuration	DC load Configuration	*Box size WDH (mm)*
VILVA-VATE UPStest system
VILVA-VATE-3KVA-UPS	3	0-3	VILVA-MOD03	VILVA-MDC03	VILVA-AC380V-6KW-RCD	VILVA-DC1000V-5KW-R	80010002000mmm
VILVA-VATE-6KVA-UPS	6	0-6	VILVA-MOD06	VILVA-MDC06	VILVA-AC380V-10KW-RCD	VILVA-DC1000V-10KW-R	80010002000mmm
VILVA-VATE-10KVA-UPS	10	0-10	VILVA-MOD10	VILVA-MDC10	VILVA-AC380V-15KW-RCD	VILVA-DC1000V-15KW-R	120010002000mmm
VILVA-VATE-20KVA-UPS	20	0-20	VILVA-MOD20	VILVA-MDC20	VILVA-AC380V-30KW-RCD	VILVA-DC1000V-30KW-R	120010002000mmm
Communication interface: Ethernet/RS485 Special specifications can be customized according to customer requirements (voltage, power, size, customized model cycle is slightly longer)

TEST ITEMS (Optional)

● AC power-on self-start test

● Communication port test

● Software version check

● Confirm UPS related parameters

● Set UPS related parameters

● Write serial number

● UPS cold start function verification

● Cold start output voltage test

● UPS, BUS voltage calibration

● Input voltage calibration

● Inverter voltage calibration

● Battery voltage calibration

● No-load output voltage stability in battery mode

● Battery mode no-load test BUS voltage

● Battery mode output harmonic test

● Mains mode no-load output voltage stability

● Mains mode no-load test BUS voltage

● Mains mode output harmonic test

● UPS phase sequence reverse function verification

● Maintenance switch function test

● EPO (emergency stop) function test

● Output current calibration

● Load error test

● Enter ITHD Test

● Mains full load output voltage frequency stability

● Mains full load test BUS voltage

● Mains full load output harmonic test

● Mains full load output DC component

● Battery full load output voltage frequency stability

● Battery full load test BUS voltage

● Battery full load output harmonic test

● The battery outputs DC component when fully loaded

● Output short circuit test

● Overload to BYPSS function test

● Light load, full battery load, mains mode conversion

● Input, output phase difference measurement

● Output waveform phase difference measurement

● Clear abnormal information and restore factory values