Energy Storage Converter Test System

Product Description

The VILVA-PCS energy storage converter test system hardware platform can be flexibly matched and choose different AC sources, DC sources, electronic loads, power analyzers, and oscilloscopes. Feedback grid simulators and DC bidirectional sources can also be selected according to different cost requirements.

The test system software application interface features test items that can be edited and test parameters that can be flexibly adjusted. The test program can be shared within the intranet, and one person can maintain the ATE platform corresponding to the product model of all production lines, and automatically generate test reports. And the system has reserved multiple communication ports for the converter.

Product advantages

● Display: battery voltage, output voltage, current, power, frequency, etc.;

● The fan adopts a small axial flow fan, which has the characteristics of large air volume, good heat dissipation and low noise;

● The fan starts automatically when the load is loaded and stops automatically after the load is unloaded;

● Independently developed new power consumption alloy resistor, with high power density, no red heat phenomenon and long service life;

● Compatible and off-grid converter testing;

● Use quick-plug connectors to facilitate wiring with products;

● Configure a code scanner to quickly scan products and enter the coding information of the product to be tested (optional);

● The test software has test items that can be edited, test parameters can be flexibly adjusted, and test reports can be automatically generated;

● Refer to the GB/T 34133-2017 test standard;

● Integrated test product communication instruction set, parameter reading, parameter correction, etc.

product details

c4 (5)

c3 (5)

c2 (5)

c1 (5)

Product parameters

Product model	Rated power(KW)	Rated voltage(V)	Battery voltage range (V)	DC bidirectional source Configuration	Ac load conﬁguration	*Box size WDH (mm)*
VILVA-PC Senergy storage converter testing system
VILVA-PCS-380V-50KW	50	380/400	150-1000	VILVA-MDC80	VILVA-AC380V-75KW-R	29009002200
VILVA-PCS-380V-100KW	100	380/400	150-1000	VILVA-MDC120	VILVA-AC380V-150KW-R	34809002200
VILVA-PCS-380V-200KW	200	380/400	150-1000	VILVA-MDC240	VILVA-AC380V-300KW-R	40009002200
VILVA-PCS-380V-300KW	300	380/400	150-1000	VILVA-MDC320	VILVA-AC380V-400KW-R	45509002200
VILVA-PCS-380V-630KW	630	380/400	150-1000	VILVA-MDC680	VILVA-AC380V-750KW-R	55009002200
Special specifications can be customized according to customer requirements (voltage, power, size, customized model cycle is slightly longer)
Control mode: local host computer Protection function: over temperature, short circuit, over current, emergency stop protection Working power supply: three-phase AC380V/50Hz Communication interface: USB, RS485, RS232, CAN, Ethernet communication

TEST ITEMS (Optional)

● AC output voltage test;

● AC output current test;

● Output power test;

● Output VTHD test;

● Efficiency testing;

● Output overcurrent protection test;

● Output short circuit protection test;

● Output load detection accuracy test;

● Input voltage test;

● Input current test;

● Input power test;

● Input power factor test;

● Enter ITHD test;

● Grid-connected current DC component test;

● Grid-connected power test;

● Grid-connected GFCI testing;

● Grid-connected current test;

● Grid-connected current balance measurement;

● Battery voltage measurement;

● Battery current measurement;

● Short circuit protection;

● Overvoltage protection;

● Overload protection;

● Low voltage protection;

● insulation protection;

● EPO protection;

● Dry contact measurement;

● External meter communication test sequence and status test; Machine status test;

● Boot timing test;

● Human-machine interface testing;

● Inverter voltage calibration;

● Battery voltage calibration;

● Write serial number;

● Write the machine model;

● Write the inverter factory parameters;

● Write the machine into run mode;writing time;

● Clear the test information and restore to factory mode.

Energy Storage Converter Test System for Performance Evaluation